Krautkramer Usn 60

Description

Descriptions

Outstanding Ultrasonic Performance

The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the “square wave pulser” form powerful portable ultrasonic inspection tool. Also features a 250 KHz to 25 MHz frequency range, VGA output, RF output and auto-callibration.

Optimized & Designed for Outdoor Use 

• Extreme temperature use (-20°C to +55°C /-4°F to 130°F)
• Easy to view in direct sunlight
• 11-hour battery operation

Vibrant colors

• Hi-resolution color LCD display produces “Analog Look and Performance” echo dynamics.
• 4 selectable vibrant display color schemes to match lighting conditions.
• Gates and gate functions are color-coded for easy identification and fast adjustment.

Features

• Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
• Auto CAL makes calibration fast & easy.
• 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency).
• 2 independent gates monitor amplitude and sound path distance for both flaw detection and thickness measurement applications.
• 250 KHz to 25 MHz frequency range.
• RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
• 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
• 1 mm to 28 m (0.040” to 1100”) range (in steel) covers thin to lengthy acoustically clean materials.
• dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
• IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
• VGA Output Option provides an easy way to connect
  to a PC monitor or PC projector for viewing by large audiences or training purposes.
• RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
• BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
• 19″ Rack Mount Model.

Specifications

Model	USN 60
Range	0.040” to 1100” (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
Material Velocity	Continuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
Display Delay	-20 to 3498 µs in steel (dependent on range)
Probe Delay/Zero Offset	0 to 999.9 µs
Damping	50, 75, 150, 500 ohms
Gain	0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked
Test Modes	Pulse echo, dual, and thru-transmission
Pulser	Square wave excitation pulse
Pulse Voltage (Square Wave Pulser Mode)	50 to 450 V scrollable in 10 V adjustments
Pulse Width (Square Wave Pulser Mode)	Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike Mode)	Low, high
Pulse Repetition Frequency	Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
Bandwidth (Amplifier Bandpass)	0.25 to 25 MHz with 10 selectable settings including broadband
Gate Monitors	Two independent flaw gates controllable over entire sweep range
Measurement Modes	Zero-to-first, multi-echo with selectable flank or peak detection
Rectification	Positive halfwave, negative halfwave, fullwave, RF
Reject (Suppression)	0 to 80% linear
Units	Inch, millimeter, or microsecond selectable
Operating Temperature	-20° to 55°C (-4° to 130°F); -25° to 70ºC (-13° to 158 º F ) storable
Languages	Selectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian
Probe Connectors	BNC or Lemo selectable at order
Keypad	International symbols
Battery Power	Lithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable
Battery Life	11 hours on Li-Ion battery pack
Size	11.1” W x 6.75” H x 6.25” D (282 x 171 x 159 mm)
Weight	6.6 lbs. (3.0 kg) Li-Ion battery; 3.5 lbs.(1.6 kg) without battery
Color Leg	Easy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors
Weld Rating Calculation	Simplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)
Warranty	2 year conditional warranty on parts and labor; free 2nd year contingent upon return of unit within 13 months of purchase for recertification
Dust Proof/Dripping Water Proof	As per IEC 529 specification for IP54 classification
Compliance	EMC/EMI: EN 55011:2007, EN 61000-6-2:2005

 

USN 60 BASE INSTRUMENT PACKAGE WITH BNC Connectors

• Bright display with operating temp. of -4°F to 130°F (-20°C to 55°C) VGA Output
• Selectable 15 to 6000 Hz Pulse Repetition Rate
• 1100” Measurement Range at Steel L-Wave Velocity
• Li-913 Lithium Ion “on-board” rechargeable battery pack
• LiBC-137 Lithium Ion battery charger kit/AC power supply
• LCD-139 Protective LCD Screen Overlays (pkg. 10), clear, field replaceable
• Laminated Menu Structure Card
• OP-178  Operating Manual
• Certificate Of Calibration / Conformity
• Firmware Upgrade CD-ROM (requires PCCBL-841)