Description
Fluke 805FC Offers
Includes Fluke Connect, which allows you to wirelessly share measurements, create work orders, and report potential problems, all through your smart phone.
Features
Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft? Excel using built-in templates
Units of measurement: Acceleration: g, m/sec2; Velocity: in/sec, mm/sec; Displacement: mils, mm
Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Rotating Machinery
The 805 FC enables technicians to confidently track bearing impacting, bearing health, overall vibration level, overall machine health, and bear-ing surface temperature. Its proprietary algorithm known as “Crest Factor Plus” identifies bearing flaws much earlier than simpler vibration meters, and the option to share the results with others in your maintenance team using Fluke Connect? or download the results to an Excel spreadsheet for tracking and trending. It?s a tool you can trust, as its built-in database of overall vibration levels was developed from years of analyzing thou-sands of real machines. The 805 FC is designed to be used by any level technician and take readings during route-based maintenance, which can be screened for changes and potential problems over time. Repair-ing machines before they fail increases uptime while reducing energy waste and maintenance costs.
Fluke 805FC Specifications
Low Frequency Range (overall measurement)
10 to 1,000 Hz
High Frequency Range (CF+ measurement)
4,000 to 20,000 Hz
Severity Levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit
50g peak (100g peak-peak)
A/D Converter
16-bit
Signal to Noise Ratio
80 dB
Sampling Rate
Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real Time Clock Backup
Coin battery
Sensor
Sensitivity
100mV g ?10%
Measurement Range
0.01 to 50g
Low Frequency Range (overall measurement)
10 to 1,000 Hz
High Frequency Range
4,000 to 20,000 Hz
Resolution
0.01g
Accuracy
At 100Hz ?5% of measured value
Amplitude Units
Acceleration
g, m/sec2
Velocity
in/sec, mm/sec
Displacement
mils, mm
IR Temperature Measurements
Range
-20 to 200?C (-4 to 392?F)
Accuracy
?2?C (4?F)
Focal Length
Fixed, at ~3.8 cm (1.5 in)
External Sensor
Frequency Range
10 to 1,000 Hz
Bias Voltage
(to supply power)
20V DC to 22V DC
Bias Current (to supply power)
Maximum 5 mA
Click here for complete specifications on the Fluke 805FC
Reviews
There are no reviews yet.