Description
The Fluke 754 Offers
The 754 supports HART protocol commands version 5.7. It supports a substantial set of HART instructions including universal commands, common practice commands, and some device specific commands.This powerful multifunction documenting calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.
Features
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement
Measure/source pressure using any of 50 Fluke 750Pxx Pressure Modules
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Holds up to a full week of downloaded procedures and calibration results
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
Requires no external box or second tool for everyday HART calibration and maintenance
Supports popular models of HART transmitters, with powerful device-specific command support for popular HART devices
Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings
REED R2002 Compact Infrared Thermometer
Built-in laser pointer identifies target area
Compact size
8:1 distance to spot size ratio
User selectable ?F or ?C
Fixed emissivity covers 90% of applications
Automatic data hold with on-screen min/max readings
Backlit display
Low battery indication and auto shut off
REED R5200 Receptacle Tester
Compact design
Detects most common 3-wire receptacle issues
LED indicators identify 5 wiring faults
Status indicator chart
CE and UL approved
Durable plastic housing
REED R5100 Non-Contact AC Voltage Detector
Suitable for outlets or against insulated wire
Built-in flashlight
Double insulated housing for increased safety
Audible (buzzer) and visual (LED) indicators when voltage present
For use on 50/60Hz circuits
Pocket clip
Auto shut off
REED R5005 True RMS Industrial Multimeter
Measures AC/DC voltage and current, frequency, resistance, capacitance and temperature
Measure voltage and current simultaneously on a large backlit LCD
Record data and and review trends with included software
Relative, Peak, Min/Max and data hold functions
Waterproof (IP67) double molded plastic housing
REED R5040 1000A AC/DC Clamp Meter
Measures AC/DC current/voltage, resistance, capacitance, frequency, duty cycle and temperature
50000-count backlit LCD display and analog bargraph
Low battery and overrange indicators
Built-in non-contact voltage detector with LED indicator
True RMS AC measurements
Min/Max, display hold and relative mode
Diode test and continuity check functions
Durable double molded plastic housing
REED R5400 Line Splitter
Enables user to measure AC current on a 2-wire or 3-wire power cord to 15A
Fits clamp jaw size 0.75″ (19mm) and above
Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground)
Two measurement sensitivity positions (1X and 10X)
Voltage check function
REED R5600 Insulation Tester (Megohmmeter)
Large backlit dual displays insulation resistance and test voltage simultaneously
250V, 500V or 1000V test voltages and insulation resistance up to 2000M?
Lock function and hanging strap for handfree operation
Lo ? function for testing connections
Datahold function
Double molded plastic housing for added protection
Low battery indicator and auto shut off
Fluke 754 Specifications
Range and 1 Year Accuracy
DC Voltage Measurement
100.00mV: 0.02% + 0.005mV
3.00000V: 0.02% + 0.00005V
30.0000V: 0.02% + 0.0005V
300.00V: 0.05% + 0.05V
AC Voltage Measurement
3.000V: 0.5% + 0.002V
30.00V: 0.5% + 0.02V
300.0V: 0.5% + 0.2V
DC Current Measurement
30.000mA: 0.01% + 5uA
110.00mA: 0.01% + 20uA
Resistance Measurement
10.000?: 0.05% + 50m?
100.00?: 0.05% + 50m?
1.0000k?: 0.05% + 0.5?
10.000k?: 0.1% + 10?
Frequency Measurement
1.00Hz to 110.00Hz: 0.05Hz
110.1Hz to 1100.0Hz: 0.5Hz
1.101kHz to 11.000kHz: 0.005kHz
11.01kHz to 50.00kHz: 0.05 kHz
DC Voltage Output
100.000mV:? 0.015% + 0.005mV
1.00000V: 0.015% + 0.0005V
15.0000V: 0.015% + 0.0005V
DC Current Output
22.000mA: 0.01% + 0.003mA
Current sint (simulate transmitter): 0.01% + 0.007mA
Resistance Sourcing
10.000?: 0.01% + 10m?
100.00?: 0.01% + 20m?
1.0000k?: 0.02% + 0.2?
10.000k?: 0.02% + 3?
Frequency Sourcing
Sinewave: 0.1Hz to 10.99Hz: 0.01 Hz
Squarewave: 0.01Hz to 10.99Hz: 0.01Hz
Sine and square 11.00Hz to 109.99Hz: 0.1Hz
Sine and square 110.0Hz to 1099.9Hz: 0.1Hz
Sine and square 1.100kHz to 21.999kHz: 0.002kHz
Sine and square 22.000kHz to 50.000kHz: 0.005kHz
Click here for complete specifications on the Fluke 754-KIT5
Reviews
There are no reviews yet.