FLUKE 754 Handheld Process Calibrator F-754/FLUKE754

Category:

Description

Features:
•Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments.
•Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters.
•Power transmitters during test using loop supply with simultaneous mA measurement.
•Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules.
•Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results.
•Holds up to a full week of downloaded procedures and calibration results.
•Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
•Easy to use.
•Three year warranty.
•Bright white dual display. Read both sourced and measured parameters simultaneously.
•Multi lingual interface.
•Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge.
•Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
•Delivered with DPC/Track Sample software.
•Compatible with many Asset Management software packages.

Included :
BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2 Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of extended tooth alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable
Fluke 754HHC HART communications cable

Specifications:
Voltage DC
–/1 Year /2 Years:
100.000 mV/ 0.02%+0.005 mV /0.03%+0.005 mV
3.00000 V /0.02%+0.00005 V /0.03%+0.00005 V
30.0000 V /0.02%+0.0005 V /0.03%+0.0005 V
300.00 V /0.05%+0.05 V/ 0.07%+0.05 V

Voltage AC
Range 40 to 500 Hz /Resolution /1 Year/ 2 Years
3.000 V /0.001 V /0.5%+0.002 V /1.0%+0.004 V
30.00 V /0.01 V /0.5%+0.02 V /1.0%+0.04 V
300.0 V /0.1 V/ 0.5%+0.2 V /1.0%+0.2 V

Current DC
–/1 Year /2 Years :
30.000 mA /0.01% + 5 uA /0.015%+7 uA
110.00 mA /0.01% + 20 uA /0.015%+30 uA

Reviews

There are no reviews yet.

Be the first to review “FLUKE 754 Handheld Process Calibrator F-754/FLUKE754”

Your email address will not be published. Required fields are marked *