Description
Fluke 1750/NT Offers
Setting up a power quality analyzer to capture detailed power quality data has never been easier that it is with the Fluke 1750. The only things you need to know are the system voltage, frequency and the power configuration (delta or wye). The analyzer then captures the most important data for up to 30 days without losing the most important details. These power meters automatically record every power quality parameter and event, on every cycle ? all the time. Once the data is captured download via Ethernet or directly to 2GB SD card (without the need of any other device). The Fluke 1750 features a wireless front panel for viewing measurements, data and setting up, implemented via a tablet computer using Bluetooth communication.
Features
Quick and reliable configuration: ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance
Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle.
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
Measure every parameter: Voltage and current on three phases, neutral, and ground
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
Applications
Long-term analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction
Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports
Quality of service compliance: Validate incoming power quality at the service entrance
Equipment Installation/Commissioning: Benchmark: power system prior to install to insure quality of service
Long-Term Analysis ? Uncover hard-to-find or intermittent issues
Load Studies ? Verify the available electrical system capacity before adding loads
Fluke 1750/NT Specifications
Input channels
Voltage: 4 channels, AC/DC / Current: 5 channels
Voltage channels
Input resistance: 2 M? / Input capacitance: < 20 pF
Measurement Type
True rms calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
Frequency Measurement Range
42.5 Hz to 69 Hz
Power Factor Measurement Range
0.000 to 1.000
Connector
RJ-45
Speed and Type
10/100 Base-T, auto MDIX
Communications Protocol
TCP/IP over ethernet
Voltage Terminals
1100 V rms
Enclosure Protection
IP30 (per EN 60529)
Click here for complete specifications on the Fluke FLUKE-1750/NT
Reviews
There are no reviews yet.