Description
Mobile and time-saving: You can assemble and disassemble this light and robust tripod very quickly.
Make your routine scanning easier with the carbon tripod with quick release. Take advantage of the opportunity to significantly save on weight without losing efficiency. Finally, you can enormously reduce the total weight of your equipment with this tripod. Furthermore, the quick release provides the opportunity to fasten the FARO Focus 3D or Trimble TX5?immediately to the tripod by pushing-in and clamping. Moreover, the quick release treats the horizontal drive of your laser scanner with care and is recommended by its manufacturer.
Designated Use:
One of the most mobile tripods, particularly suited for frequent traveling due to low weight and small pack size
Fastest clamping and unclamping of the FARO Focus3D or Trimble TX5?due to quick release?
Usable indoors and outdoors due to supplied spikes
Product characteristics – Carbon tripod:
3/8 inch an 1/4 inch connection
4 extendible leg segments
weight: approx. 2.43 kg
transport length: approx. 1.08 m
maximum effective height: approx. 1.87 m
minimum effective height: approx. 0.40 m
material: carbon fiber 8X
spirit level and compass
maximum load: 18 kg
Product characteristics?- Pan head:
for mounting on the tripod
length: 111 mm
width: 70 mm
height: 37 mm
weight: 0.35 kg
maximum load: 8 kg
spirit level
3/8 inch female thread
Scale from 0? to 360?
Product characteristics – Moving head disk:
for mounting on the laser scanner
treats the horizontal drive of your laser scanner with care
length: 70 mm
width: 38 mm
height: 10 mm
thread: 3/8 inch
weight: 43 g
fixed support due to rubberized material
Compatible laser scanner:
FARO Focus 3D and Focus3D X 330?due to 3/8 inch connection
Trimble TX5 due to 3/8 inch connection
Mobile and time-saving: You can assemble and disassemble this light and robust tripod very quickly.
Make your routine scanning easier with the carbon tripod with quick release. Take advantage of the opportunity to significantly save on weight without losing efficiency. Finally, you can enormously reduce the total weight of your equipment with this tripod. Furthermore, the quick release provides the opportunity to fasten the FARO Focus 3D or Trimble TX5?immediately to the tripod by pushing-in and clamping. Moreover, the quick release treats the horizontal drive of your laser scanner with care and is recommended by its manufacturer.
Designated Use:
One of the most mobile tripods, particularly suited for frequent traveling due to low weight and small pack size
Fastest clamping and unclamping of the FARO Focus3D or Trimble TX5?due to quick release?
Usable indoors and outdoors due to supplied spikes
Product characteristics – Carbon tripod:
3/8 inch an 1/4 inch connection
4 extendible leg segments
weight: approx. 2.43 kg
transport length: approx. 1.08 m
maximum effective height: approx. 1.87 m
minimum effective height: approx. 0.40 m
material: carbon fiber 8X
spirit level and compass
maximum load: 18 kg
Product characteristics?- Pan head:
for mounting on the tripod
length: 111 mm
width: 70 mm
height: 37 mm
weight: 0.35 kg
maximum load: 8 kg
spirit level
3/8 inch female thread
Scale from 0? to 360?
Product characteristics – Moving head disk:
for mounting on the laser scanner
treats the horizontal drive of your laser scanner with care
length: 70 mm
width: 38 mm
height: 10 mm
thread: 3/8 inch
weight: 43 g
fixed support due to rubberized material
Compatible laser scanner:
FARO Focus 3D and Focus3D X 330?due to 3/8 inch connection
Trimble TX5 due to 3/8 inch connection
Reviews
There are no reviews yet.