Description
Description:
CANIN+ with rod and wheel electrodes for half-cell corrosion potential measurements and Wenner probe for electrical resistivity measurements – Consisting of: consisting of: Indicating device CANIN+, carrying strap, protection sleeve for indicating device, transfer cable 1.5 m (5 ft), USB-serial adapter, operating instructions, carrying case CANIN+. Rod electrode accessories: rod electrode with spare parts, electrode cable 1.5 m (5 ft), cable coil 25 m (82 ft), CANIN ProVista PC software on CD, bottle with copper sulfate 250g. Wheel electrode accessories: one-wheel electrode system, tool kit to wheel electrode system, bottle with citric acid 250g. Wenner Probe accessories: Wenner resistance probe with spare rubber foam pads, cable to Wenner probe, control plate to Wenner probe.
Corrosion Analysis allows the contractor to limit the maintenance tasks on reinforced concrete to the areas where it is really required. The Canin+ is the fastest instrument for corrosion analysis, offering a practical, cost-effective approach to the investigation of reinforced concrete. Corrosion analysis with the Canin+ allows a rapid, comprehensive test of the site and provides a fast assessment of locations where corrosion is likely to take place. Corrosion analysis with the half-cell potential method: accurate field potential measurements aid in detecting active corrosion in rebars.
Features:
Immediate presentation of test area and reading directly on the instrument’s display
Total memory for 235’000 readings which can be stored
For further analysis, the Canin ProVista Software allows downloading, presenting and editing data measured by this instrument for corrosion analysis.
Technical Data
| Corrosion Analysis with the Potential Measurement | |
| Measurement range | -999 mV to +340 mV |
| Resolution | 1 mV |
| Memory | non-volatile memory for up to 235’000 measurements stored in up to 71 object files |
| Software | Proceq Canin ProVista Software for downloading data and evaluation on PC |
| Battery operation | six LR 6 (AA) batteries, 1.5 V for up to 60 h (or 30 h with activated backlight) |
| Memory | non-volatile memory for up to 5’800 measurements stored in up to 24 object files |
| Data transfer | by Windows Hyperterminal |
| Battery operation | six LR 6 (AA) batteries, 1.5 V for up to 40 h (or 20 h with activated backlight) |
| General | |
| Impedance | 10 MΩ |
| Operating temperature | 0° to 60° C |
| Storage temperature | -10° to 60° C |
| Display | 128 x 128 pixel graphic LCD with back light |
| Data output | RS 232 interface, USB with adapter |
| Case dimensions | 580 x 480 x 210 mm (22.8 x 18.9 x 8.3 in.) |
| Weight | net. 10.6 kg (23.5 lbs); shipping 14 kg (31.1 lbs) |
Reviews
There are no reviews yet.