Description
descriptions:
The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square pulser. Features like high levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ratio, can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. The Masterscan 700M’s enclosure is constructed using impact resistant materials and is designed to meet IP67 standards, offering excellent water resistance and harsh conditions. Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.
Features
- Configurable on-board software
- Customizable & intuitive menus
- Split DAC/AVG
- Angle measurement mode
- Dryscan capability
- Encoded B-Scan
- A-Scan fade
- 4GB on-board memory
- USB interface for PC import/export
Specifications
| Test Range: | 0.04″ (0-1mm) up to 787″ (0-20,000mm) in steel at 19455f/s (5930m/s) |
| Velocity: | 256 – 16000 m/s continuously variable |
| Probe: | 0 to 1000 μs |
| Delay: | 800″ (0-20,000m) in steel at 5930 m/s |
| Gain: | 0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps |
| Test Modes: | Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch. |
| Damping: | 50 and 400 Ohm damping selectable |
| Pulser: | 100-450V – ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load. |
| P.R.F: | Adjustable 5Hz to 6kHz. External sync also available. |
| Screen Update Rate: | 60Hz |
| Rectification: | RF, Full wave, +ve half-wave and -ve half-wave |
| Frequency Range: | 8 selectable filter bands
|
| System Linearity: | Vertical = 0.5% Full Screen Height (FSH); Horizontal +/-0.2% Trace Full Screen Width (FSW) |
| Reject (Selectable): | Up to 80% Linear reject (removes baseline noise without affecting indication amplitude) or Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes). LED Warning when active. |
| Units: | Metric (mm), inch (in) or microseconds |
| Display: | Color Transflective VGA (640 x 480) TFT Display Area: 4.57″ x 3.43″ (116.16 x 87.2mm) A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS). Colors: 9 color options with variable brightness. |
| Gate Monitor: | Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visible alarms. Gate resolution is 5Ns. |
| Zoom: | Expands range and delay to cover the area set by Gate 1 start & width controls. |
| AGC: | Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%. |
| Contour: | Trailing-Edge-slew-rate control to reduce half cycles in rectified modes. Selectable from one of 6 levels. |
| Waveform Smoothing: | Select from
|
| Persistence: | Causes previous A-scans to “fade out” at a user-determined rate |
| Auto-Cal: | Provides automatic calculation of velocity and probe zero from 2 reference echoes. |
| Reference Waveform: | Displays a previously stored A-log in a color different from the active display, enabling a quick visual check of the differences. |
| Clock: | Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs, etc. |
| Internal Memory: | 4GB storage available for A-scans, panels, T-logs, B-logs, etc… 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs. |
| Active Peak Memory: | Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color. |
| Notes: | Alphanumeric labelling for panel stores, A-logs, B-logs, etc… |
| Display Freeze: | Hold the current waveform on screen for off-line processing |
| Help Key: | Shows software and hardware information |
| Language Support: | Multiple languages are selectable from a list including: English, French, Spanish, Russian, Chinese (Modern). Others are available upon request. |
| Encoder Connection: | D-Sub 15 connector |
| Video Output: | Standard on 700M |
| Proportional Outputs: | Available on 700M |
| External Sync: | Available on 700M |
| USB Connection: | Internal Storage shown as Memory Device. |
| Transducer Sockets: | BNC or LEMO (factory option) |
| Power: | Lithium Ion 14.4V battery pack. Typically 16 hours for Masterscan 700M. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional. |
| Charger: | 100-240 VAC, 50-60 Hz |
| Environmental: | Designed to meet IP67 |
| Temperature: | Operating: 14°F – 131°F (-10°C – 55°C) Storage: -40°F – 167°F (-40°C – 75°C) |
| Dimensions: | 5.7″ x 10″ x 5.7″ (145 x 255 x 145mm) |
| Weight: | 5.5 lbs. (2.2kg) with battery |
| Warranty: | 2 year |
| Extended Warranty: | Sonacover – extended 5 year warranty, including 4 calibrations. |
| Calibration Standard: | EN12668-1:2010 (Detailed Specification available upon request). |
| Standards: | Vibration to 514.5-5 Proc 1 Annex Fig 6 Shock 516.5 Proc 1 15g/6ms Explosive atmospheres – MIL-STD 810G Method 511.5 Procedure 1 |
Reviews
There are no reviews yet.