Description
Features:
•Test voltages up to 10 kV provides solutions for all applications
•CAT III 1000 V, CAT IV 600 V safety rating
•Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
•Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
•Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
•Long battery life gives the user over 750 tests between charges
•Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
•Guard system eliminates the effect of surface leakage current on high-resistance measurements
•Large digital/analog LCD for easy viewing
•Capacitance and leakage current measurement
•Ramp function for breakdown testing
•Resistance measurements up to 2TO
•Timer settings up to 99 minutes for timed tests
•3-year warranty
It includes:
•IP67 hard carrying case
•Ruggedized Alligator clips
•Test cables with alligator clips (red, black, green)
•Infrared adapter with interface cable
•AC power cord
Specifications:
Bar graph range :0 to 1 TO
Insulation test voltage accuracy: -0 %, +10 % at 1 mA load current
Induced ac mains current rejection: 2 mA maximum
Charging rate for capacitive load: 5 seconds per µF
Discharge rate for capacitive load: 1.5 s/µF
Leakage current measurement Range: 1 nA to 2 mA Accuracy: ± (5 % + 2 nA)
Capacitance measurement Range: 0.01 uF to 15.00 µF Accuracy: ± (15 % rdg + 0.03 µF)
Timer Range: 0 to 99 minutes Resolution Accuracy:
Setting: 1 minute
Indication: 1 second
Live circuit warning Warning Range: Voltage Accuracy:
30 V to 660 V ac/dc, ± (15 % + 2 V)
50/60 Hz
General Specifications
Display :75 mm x 105 mm
Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12
Charger input (AC) :Charger Input (AC) 85 V to 250 V ac 50/60 HZ 20 VA
This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only.
Dimensions: 170 mm x 242 mm x 330 mm (6.7 in x 9.5 in x 13 in)
Weight: 3.6 kg (7.94 lb)
Temperature (operating): -20 ºC to 50 ºC (-4 ºF to 122 ºF)
Temperature (storage) :-20 ºC to 65 ºC (-4 ºF to 149 ºF)
Humidity :80 % to 31 ºC decreasing linearly to 50 % at 50 ºC
Altitude: 2000 m
Enclosure sealing :IP40
Input overload protection :1000 V ac
Electromagnetic compatibility: EN 61326
Safety compliance :CAT III 1000 V, CAT IV 600 V
Pollution degree :2
Reviews
There are no reviews yet.