Topcon HiPer SR GPS Receivers

$2,650

Category:

Description

Topcon HiPer SR GPS Receivers
Topcon’s premier GNSS receiver in a smart, compact, ultra-rugged GNSS receiver.
Lightweight yet tough enough to survive a 2m drop, and enough rechargeable batter for 20 consecutive hours of operation! Topcon’s HiPer SR integrated receiver operates cable free, with no antennas, battery doors, or connectors. HiPer SR features the 226 channel, universal tracking capable Vanguard chip for unmatched performance flexibility to meet the needs for all jobs, large or small. Use a single SR for fast and accurate static GNSS or as a network RTK by adding network functionality and cellular enabled controller. Use a pair for an economical base and rover RTK solution or with Topcon’s LongLink communication solution for the perfect small site-wide solution. The best part? There’s a HiPer SR to fit your budget.Power. Performance. Price. With the HiPer SR, it all fits in the palm of your hand.
Features include:
Vanguard chip technology featuring 226 Channels with Universal Tracking
Compact, lightweight, rugged design
Completely integrated receiver, antenna, batteries, memory, and communications
Integrated multi-channel LongLink™ communication technology
Sealed battery providing up to 20 hours of operation
4GB onboard memory (Firmware limit of 2Gb for static data)
Reduced MINTER display, with single-button operation
Charging (serial and power) and USB ports only.Specifications
Tracking
Number of Channels     226 Channels
Signals Tracked
GPS: L1 C/A, L1, L2P(Y), L2, L2C code and carrier
GLONASS: L1 C/A, L1P, L2 C/A, L2P code and carrier
SBAS (WAAS/EGNOS/MSAS) L1 code and carrier
QZSS L1 code and carrier

Galileo1
Antenna Type     Integrated Antenna w/ internal ground plane
Technology     Quartz Lock Loop, Intelligent Tracking Optimization
Topcon AMR, Universal Tracking Technology
Topcon AFRM
Positioning Accuracy*
RTK (L1+L2)     H: 10 mm + 1.0 ppm; V: 15 mm + 1.0 ppm
Static     Fast Static (L1)
H: 3 mm + 0.8 ppm; V; 4 mm + 1.0 ppm
Fast Static (L1+L2)
H: 3 mm + 0.5 ppm; V:; 5 mm + 0.5 ppm
Kinematic (L1, L1+L2)
H: 10 mm + 1.0 ppm; V: 15 mm + 1.0 ppm
DGPS     < 0.4 m
SBAS     < 0.6 m
Autonomous     < 1.2 m
Maximum Data Rate     20 Hz
Communication
RTK Broadcast     LongLinkTM 300m+ Range,
Maximum of 3 simultaneous rovers
Bluetooth®     Yes
Serial     Yes
USB     Yes, Client
Data & Memory
Memory     4GB internal (non-removable)
Real Time Data Output     TPS, RTCM SC104 v 2.x, 3.x; CMR/CMR+
ASCII Output     NMEA 0183 version 2.x and 3.0
Physical
Dimensions     150 (W) x 150 (D) x 64 (H) mm
6 (W) x 6 (w) x 1.5 (H) inch
Weight     850 gms, 1.87lbs
Status Display / Panel     MINTER
External Power Connector     Yes
Power Supply
Operation Time     Up to 20 hours
Environmental
Operating temperature     -20ºC to +65ºC with internal batteries
-40ºC to +65ºC without internal batteries
(external power)
Storage temperature     -40ºC to +70ºC
Humidity     100%, condensing
Water & Dustproof rating     IP67 (1 meter submersion, fully dustproof)
1 Support for Galileo will be incorporated into HiPer SR when the constellation has matured and is ready for commercial use.

Reviews

There are no reviews yet.

Be the first to review “Topcon HiPer SR GPS Receivers”

Your email address will not be published. Required fields are marked *