Description
Fluke 62 MAX+/323/1AC IR Thermometer, Clamp Meter and Voltage Detector Kit
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem
What’s Included in the Kit:
Fluke 62 MAX+ IR Thermometer
Fluke 323 True-rms Clamp Meter
Fluke 1AC II VoltAlert Voltage Detector
C115 Soft Case
About the Fluke 62 MAX+
Small in size extremely accurate and very easy to use. IP54 rated for dust and water resistance.
Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX + infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX + are so tough, they’re the only IR thermometers around you can handle without care.
If you’ve ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That’s because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you’re getting temperature at the laser point only. Fluke’s 62 Max+ uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -30?C to 650?C with a response time less than 300 ms. The Model 62 Max uses a single laser pointer and covers the temperature range from -30?C to 500?C.
The Max 62 and Max 62+ are designed to withstand drops up to 3 m. Is screen is located in a position and with a viewing angle (15?) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you’ve identified the measurement point.
Why IR Thermometers?
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.
Why Fluke 62 MAX and Fluke 62 MAX+?
Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you’d expect from the experts in measurement tools: small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX+ are so tough, they’re the only IR thermometers around you can handle without care.
About the Fluke 323 Clamp Meter
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Measurement capability
400 A ac current measurement
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement up to 4 k? with continuity detection
About the Fluke 1 AC II VoltAlert Voltage Detector
The next generation VoltAlert? AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Fluke 62 MAX+ SpecificationsSpecificationsTemperature RangeFluke 62 MAX -30 ?C to 500 ?C (-22 ?F to 932 ?F)Fluke 62+ MAX -30 ?C to 650 ?C (-22 ?F to 1202 ?F)AccuracyFluke 62 MAX ?1.5 ?C or ?1.5% of reading, whichever is greater
-10 ?C to 0 ?C: ?2.0
-30 ?C to -10 ?C: ?3.0Fluke 62+ MAX ?1.0 ?C or ?1.0% of reading, whichever is greater
-10 ?C to 0 ?C: ?2.0
-30 ?C to -10 ?C: ?3.0Response Time (95%)Fluke 62 MAX <500 ms (95% of reading)Fluke 62+ MAX <300 ms (95% of reading)Spectral Response 8 to 14 micronsEmissivity 0.10 to 1.00Optical ResolutionFluke 62 MAX 10:1 (calculated at 90% energy)Fluke 62+ MAX 12:1 (calculated at 90% energy)Display Resolution 0.1 ?C (0.2 ?F)Repeatability of ReadingsFluke 62 MAX ?0.8% of reading or (45 Hz to 65 Hz)
2.5 % ? 5 digits
(65 Hz to 400 Hz)1.5 % ? 5 digits
(45 Hz to 400 Hz)
Note: Add 2 % for
position sensitivity2 % ? 5 digits
(45 Hz to 65 Hz)
2.5 % ? 5 digits
(65 Hz to 400 Hz)DC currentRange–40.00 A/400.0 AAccuracy–2 % ? 5 digitsAC voltageRange600.0 V600.0 V600.0 VAccuracy1.5 % ? 5 digits1.5 % ? 5 digits1.5 % ? 5 digitsDC voltageRange600.0 V600.0 V600.0 VAccuracy1.0 % ? 5 digits1.0 % ? 5 digits1.0 % ? 5 digitsResistanceRange400.0 ?/ 4000 ?400.0 ?/ 4000 ?400.0 ?/ 4000 ?/ 40.00 k?Accuracy1.0 % ? 5 digits1.0 % ? 5 digits1.0 % ? 5 digitsContinuity? 70 ?? 30 ?? 30 ?Capacitance-100.0 ?F to 1000 ?F100.0 ?F to 1000 ?FFrequency–5.0 Hz to 500.0 HzAC responseTrue-rmsTrue-rmsTrue-rmsBacklight-YesYesData holdYesYesYesContact temperature–10.0 ?C to 400.0 ?C
(14.0 ?F to 752.0 ?F)-10.0 ?C to 400.0 ?C
(14.0 ?F to 752.0 ?F)Min/Max–YesSizeH x W x D (mm)207 x 75 x 34207 x 75 x 34207 x 75 x 34Max wire diameter30 mm (600 MCM)30 mm (600 MCM)30 mm (600 MCM)Weight265 g208 g283 gCategory ratingCAT III 600 V
CAT IV 300 VCAT III 600 V
CAT IV 300 VCAT III 600 V
CAT IV 300 VWarrantyTwo-yearTwo-yearTwo-yearFluke 1 AC II VoltAlert SpecificationsOperating principle
Senses the steady state electrostatic ?eld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.Voltage sensing ranges
Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit modelDetector tip style
Blade or round, depending on modelLight source
One high intensity red LEDAgency Approvals
c CSA us, CE, TUV, C-TickSafety Rating
1000 V, CAT IVIP Rating
IP 40Operating Temperature
-10 ?C to 50 ?COperating humidity ranges0 % to 95 %(0 ?C to 30 ?C)0 % to 75 %(30 ?C to 40 ?C)0 % to 45 %(40 ?C to 55 ?C)Operating Altitude
3000 metersBatteries
2 AAA alkaline batteries included
Click here for complete specifications on the Fluke 62-MAX+/323/1AC
Reviews
There are no reviews yet.