Fluke 717-1500G Pressure Calibrator

$692

Pressure Calibrator 0 to 1500 PSI, (0 bar to 103.4 bar, 0 to 10342 kPa).

SKU: 717-1500G

Description

Fluke 717-1500G Offers

Compact and professional pressure calibration tools.
Fluke 717-1500G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability. The Fluke 717 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.

The Fluke 717 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA.

This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.
Measure:

Temperature from Thermocouple output
Loop Current
Pressure, 0.05% of full scale
Temperature from RTD output
Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
Pressure, 0.05% of full scale with internal 100 psig sensor

Fluke 717-1500G Specifications

Measurement Accuracy
Pressure
717 Series
Measure Pressure
(internal sensor)
Accuracy
0.05% full scale
Functions
Zero, Min, Max, Hold, Damp
Note Gasses / liquids (non-corrosive)
?
Fluke 717 1500G
Range
0 to 1500 PSI, (0 bar to 103.4 bar, 0 to 10342 kPa )
Resolution
0.1 PSI, 0.01 mbar, 1 kPa
Over Pressure
2 X full scale
?

Fluke 717 Series with Pressure Modules
Measure Pressure
(via pressure module connector using optional Pressure Modules)
Range
29 pressure modules, 0-1 inH20 to 10,000 PSI, 2.5 mbar to 700 bar ranges. Over pressure per pressure module specs
Resolution
Per pressure module specs
Accuracy
per pressure module specs
Functions
Zero, Min, Max, Hold, Damp
Current
Range:

0 to 24 mA (-25% to 125%)
Resolution
0.001 mA
Accuracy
0.015% + 2 counts

Specifications
Loop Power
Range
24 V dc
Accuracy
+/- 10%
Note: Drive; 20 mA into 1000 ohms for battery >6.8V; 700 W for battery 5.8 to 6.8 V
Display
Clear 5 digit LCD

Environmental Specifications
Operating Temperature
-10 ?C to 55 ?C
Storage Temperature
-40 ?C to 60 ?C
Humidity (Without Condensation)
95% (10 ?C to 30 ?C)
75% (30 ?C to 40 ?C)
45% (40 ?C to 50 ?C)
35% (50 ?C to 55 ?C)
Operating Altitude
3,000 M max

Safety Specifications
Safety
CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications
Size
201 mm L x 98 mm W x 52 mm (7.93in. L x 3.86in. W X 2.06in.)
Weight
22 oz, approximately 600G with holster
Warranty
3 years
Shock & Vibration
Random, 2G, 5-500 Hz
1m drop test
Battery type
Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

Click here for complete specifications on the Fluke 717-1500G

What’s included with the Fluke 717-1500G
Protective Yellow Holster with Test Lead Storage
Instruction Sheet (14 Languages)
Test Leads and Alligator Clips
NIST-Traceable Calibration Report and Data
Single 9V Alkaline Battery
Accessories
Click on a category to view a selection of compatible accessories with the Fluke 717-1500G Pressure Calibrator.

Test Leads

Fluke TP4 Slim Reach Test Probe Set

TP4

Designed to fit securely into IEC electrical wall outlets.

$21.99 USD

Learn More

Fluke TP 38 Slim Reach Test Probe Set

TP38

For probing closely spaced or recessed terminals.

$21.99 USD

Learn More

Fluke TP220 SureGrip Industrial Test Probes

TP220

For use with TL222 and TL224 test leads provides reliable contact.

$21.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set

TP2

For probing closely spaced or recessed terminals compatible with AC72.

$21.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set

TP1

For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.

$21.99 USD

Learn More

Fluke TL40 Retractable Tip Test Lead Set

TL40

Adjustable to desired length from 0 to 76mm.

$49.99 USD

Learn More

Fluke TL27 Heavy Duty Test Lead Set

TL27

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.

$39.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads

TL224

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

$32.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads

TL222

Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.

$32.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit

TL221

Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.

$32.99 USD

Learn More

Carrying Cases

Fluke C100 Hard Sided Carrying Case

C100

Carrying Case for all handheld multimeters.

$64.99 USD

Learn More

Fluke C101 Hard Carrying Case

C101

$74.99 USD

Learn More

Fluke C1600 Meter and Accessories Gear Box

C1600

$79.99 USD

Learn More

Fluke C510 Leather meter case

C510

$84.99 USD

Learn More

Fluke C550 Premium Tool Bag

C550

Tool Bag with steel reinforced frame.

$98.99 USD was $109.99

Learn More

Fluke C90 Soft Carrying Case for DMMs

C90

$42.99 USD

Learn More

Fluke C800 Hard Meter and Accessory Case

C800

$64.99 USD

Learn More

Fluke H80M Protective Holster with Magnetic Hanging Strap

H80M

$54.99 USD

Learn More

Fluke C25 Large Soft Carrying Case for Digital Multimeters

C25

Featuring a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters.

$44.99 USD

Learn More

Fluke C125 Soft Meter Case for Fluke Multimeters

C125

$39.99 USD

Learn More

Alligator Clips

Fluke AC285 SureGrip Large Jaw Alligator Clip Set

AC285

Recommended for use with TL222 and TL224 Test Leads.

$27.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips

AC283

Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.

$49.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips

AC280

Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.

$39.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips

AC220

Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.

$49.99 USD

Learn More

Test Leads & Probes

Fluke TLK287 Electronics Master Test Lead Set

TLK287

$152.99 USD was $169.99

Learn More

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit

TL225

Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.

$116.99 USD was $129.99

Learn More

Fluke TL81A Deluxe Electronic Test Lead Set

TL81A

Works with Digital Multimeters that accept safety shrouded, standard diameter, banana connectors. Includes a quad-fold nylon pouch.

$143.99 USD was $159.99

Learn More

Fluke TL80A Basic Electronic Test Lead Set

TL80A

1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.

$84.99 USD

Learn More

Fluke TL76 All-in-one Test Lead Set

TL76

2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.

$39.99 USD

Learn More

Fluke TL71 Premium Right Angle Test Lead Set

TL71

Comfort grip probes with flexible silicone-insulated, right-angle test leads. They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.

$32.99 USD

Learn More

Fluke TL238 Test Lead Set for High Energy Environment

TL238

Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.

$84.99 USD

Learn More

Fluke TL223 SureGrip Electrical Test Lead Set

TL223

Handy all-in-one kit that includes SureGrip alligator clip set, slim-reach test probes (flat bladed), and SureGrip silicone test lead set.

$84.99 USD

Learn More

Fluke TL220 Suregrip Industrial Test Lead Set

TL220

Includes the Fluke AC220, Fluke TP220, and Fluke TL224.

$84.99 USD

Learn More

Test Clips

Fluke AC89 Heavy Duty Insulation Piercing Test Clip

AC89

Insulated, Shrouded Banana Jack. One Red.

$49.99 USD

Learn More

Current Probes

Fluke i410 AC/DC Current Clamp

I410

1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.

$251.99 USD was $279.99

Learn More

Fluke i1010 AC/DC Current Clamp

I1010

Measures 1 A to 1000 A and provides accurate current reading without breaking the circuit.

$391.49 USD was $434.99

Learn More

Clamp Meters

Fluke 771 Milliamp Process Clamp Meter

771

Best in class clamp meter with 0.2% accuracy, 0.01mA resolution and sensitivity.

$638.99 USD was $709.99

Learn More

Process Tools

Fluke 700PTP-1 Pneumatic Test Pump

700PTP-1

The Fluke 700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi. For use with 700 series pressure modules or test gauges.

$719.99 USD was $799.99

Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit

700PRV-1

To be used with Fluke 700HTP-1 Hydraulic Test Pump.

$638.99 USD was $709.99

Learn More

Fluke 700PMP Pressure Pump

700PMP

$458.99 USD was $509.99

Learn More

Fluke 700PCK Pressure Calibration Kit

700PCK

$1,419.99 USD

Learn More

Ask a question about the Fluke 717-1500G Pressure Calibrator :

Please enable JavaScript to view the comments powered by Disqus.

Product Videos

Close

Ask our experts
To ask our Fluke experts a question please include your contact details.
* Required Fields


Call us toll free
1.888.610.7664
Send It

Request for Quote

To request an official quote for the Fluke 717-1500G please include your quantities and contact details.

* Required Fields

First Name*

Last Name*

Company

Phone*

Email*

Address*

City*

Country*

Province/State*

ZIP Code*

Quantity *


Submit Request Add More Items

Hi ,

Your quote cannot be processed with as the country.

Change Address

?
This website can?t process Canadian pricing.
Don?t worry, we can switch everything over to our Canadian affiliate.
Request Quote on ITM.com

x
Be the first to know!

Be the first to know when we have news, discounts, special offers and promotions.
*We don?t share your email. You can unsubscribe at any time.

First Name

Last Name

Account #

Act Name

Contact #

Last Trans Date

/
/

( mm / dd / yyyy )

Shows

B2B Status

SIC

SIC Category

Global Test Supply
B2B
B2C
Non-Web

Micro USA
CanarySense.com
FLIR-Direct.com
Fluke-Direct.com
GlobalScientificSupply.com
MyFlukeStore.com
PowerMeterStore.com
Raytek-Direct.com
REED-Direct.com
Sensit-Direct.com
Shimpo-Direct.com
ShopAEMC.com
Testo-Direct.com

Close

Just Added to Your Cart:
?

Cart Total: (12 items) 560,253
View Cart & Checkout Continue Shopping

This product includes one lens. Therefore, you must select at least one lens with this item.
OK

The 14? lens must be purchased with the 24? lens as well.
OK

About Us
Contact Us

Our Stores
Calibration Laboratory
Traceable Certified Instruments
New Products / Promotions

Site Security/Privacy
Terms & Conditions (FAQs)
Shipping Rates

First Name

Last Name

Account #

Act Name

Contact #

Last Trans Date

/
/

( mm / dd / yyyy )

Shows

B2B Status

SIC

SIC Category

Global Test Supply
B2B
B2C
Non-Web

Micro USA
CanarySense.com
FLIR-Direct.com
Fluke-Direct.com
GlobalScientificSupply.com
MyFlukeStore.com
PowerMeterStore.com
Raytek-Direct.com
REED-Direct.com
Sensit-Direct.com
Shimpo-Direct.com
ShopAEMC.com
Testo-Direct.com

We accept these payment methods:

We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.

Reviews

There are no reviews yet.

Be the first to review “Fluke 717-1500G Pressure Calibrator”

Your email address will not be published. Required fields are marked *