Description
Fluke 718-30US Offers
The complete solution to pressure calibration
Fluke 718-30G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability. The Fluke 718 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.
The Fluke 718 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA. The Fluke 718 provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.
Measure:
Temperature from Thermocouple output
Loop Current
Pressure, 0.05% of full scale
Temperature from RTD output
Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
Pressure, 0.05% of full scale with internal 30 psig sensor
Fluke 718-30US Specifications
Range
-12 to 30 PSI, -850 mbar to 2 bar (internal sensor) Over Pressure 3xFS
Resolution
0.001 psi, 0.1 mbar
Accuracy
0.05% full scale
Functions
Zero, Min, Max, Hold, Damp, Note: for use with non-corrosive gasses
Loop Power Range
24 V dc
Loop Power Accuracy
+/- 10%, Note: Drive; 20 mA into 1000 ? for battery >6.8V; 700 ? for battery 5.8 to 6.8 V
Measure Accuracy Range
0 to 24 mA
Measure Accuracy Resolution
0.001 mA
Measure Accuracy
0.025% + 1 count
Display
LCD, 5 digit pressure and current simultaneous
Operating temperature
-10 to 55?C
Operating Altitude
3,000m max
Safety
CSA C22.2 No. 1010.1:1992
Maximum voltage
30V
Size
216 mm L x 94 mm W x 67 mm (8.5 in. L X 3.72 in. W X 2.61in.)
Weight
Approx. 992g (35 oz)
Shock & Vibration
Random, 2G, 5-500 Hz, 1m drop test
Battery type
Two 9V batteries, ANSI/NEDA 1604A or IEC 6LR61, Battery life: 4 to 20 hours, typical, depending on functions
Click here for complete specifications on the Fluke 718-30US
Reviews
There are no reviews yet.