Fluke P3840-MPA Hydraulic Deadweight Tester, 4 to 260mPa

$15,868

With select nominal increments in mPa units, from 4 to 260mPa, this hydraulic deadweight tester is suitable for a wide range of testing applications.

SKU: P3840-MPA Category:

Description

Fluke P3840-MPA Offers

This hydraulic tester has mass set that can be trimmed to local gravity FOC.

Features

Pressure ranges to 60,000psi (4,000bar)
Select from 2 accuracy classes; 0.02% or 0.015% of reading
Includes hand pump and intensifier for generating high pressures
Tungsten-carbide piston and cylinder provide long-term stability and durability

Fluke P3840-MPA Specifications

Pressure Ranges
500 to 30,000psi, or 40 to 2,000bar, or 4 to 200mPa, or 40 to 2,000kgf/cm2

Standard Weight Material
Series 3 non-magnetic, austenitic, stainless steel

Weight Density
7.8g/cm3

Piston Material
Tungsten carbide with nickel binder

Cylinder Material
Tungsten carbide with cobalt binder

Thermal Coefficient of Expansion
11ppm/?C

Test Port Adapters
9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP

Reservoir Volume
235cc (14.3in3)

Intensifier Ratio
7 to 1

Seal Materials
Nitrile

Operating Fluid
Dioctyl Sebacate (DOS), our reference 55-600
Click here for complete specifications on the Fluke P3840-MPA

Reviews

There are no reviews yet.

Be the first to review “Fluke P3840-MPA Hydraulic Deadweight Tester, 4 to 260mPa”

Your email address will not be published. Required fields are marked *